-
)
WARN PEDESTRIAN WORKERS OF APPROACHING VEHICLES AT CROSSING POINTS AND BLIND CORNERS, EVEN SLOW APPROACHING VEHICLES DOWN WITH ACTIVE SIGNAGE AND ZONE CONTROL. Physical segregation of workplace vehicl ... -
)
General query
-
)
service general query
-
)
escape general query
-
)
Protection general query
-
)
general query
-
)
The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.
-
)
Dräger X-plore® 8000 helmets provide effective mechanical head protection combined with maximum comfort. Regardless of whether you are dependent on ambient air or working independently, the helmets are an integral part of our Dräger X-plore® 8000 powered air-purifying respirator systems and Dräger X-plore® 9300 compressed air line device.
-
)
Challenging workplace conditions demand reliable solutions. The Dräger X-plore® 8000 powered-air purifying respirator offers a new level of intuitive handling combined with intelligent electronics that provide the high degree of safety your people need to focus on the task at hand.
-
)
The oxygen self-rescuers Dräger Oxy 3000 and 6000 MK III are easy and fast to handle under extreme conditions and are service-free for up to 10 years while being worn. The unique safety eye provides you the ability to check the device without additional tools. The Oxy series provides breathing protection according to the highest standards since decades - made in Germany.
-
)
The Dräger Saver CF constant flow Emergency Escape Breathing Apparatus allows safe, effective and uncomplicated escape from hazardous environments. Simple to put on and featuring automatic operation, this hood-based, constant flow breathing device can be used with minimal training.
-
)
The Dräger Sampling Tubes and Systems are very reliable in use even with complex compounds and mixtures of substances.
-
)
The Dräger PARAT® 5500 fire escape hood was developed in cooperation with users – always with the focus on offering the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested CO P2 filter ensure protection from toxic fire-related gases, vapours and particles for at least 15 minutes while escaping.
-
)
Whether in the chemical, metal, or automotive industries, ship building, supplies, or disposal: The Dräger X-plore® 5500 full face mask is the right solution for environments where not only increased respiratory protection is required, but also a clear vision is mandatory.
-
)
Designed with simplicity in mind, the Dräger PARAT® 1200 is an extra small mouthpiece / nose clip filtering escape device equipped with a multi-gas ABEK filter that offers you 10 minutes of protection against a variety of toxic industrial gases and vapours. This compact lifesaver is approved to the only recognized standard for filtering industrial escape devices (DIN 58647-7).
-
)
A perfect combination: modern design and light weight offer you extra protection and comfort. Choose from the low-maintenance, cost-effective Dräger X-plore® 3300 half mask or Dräger X-plore® 3500 version for long lasting protection under tough conditions.
-
)
The Dräger X-plore® 1300 combines proven and reliable respiratory protection with intelligent new ideas ensuring a high level of comfort and ease of use.
-
)
Breathe cool, stay safe: Dräger X-plore® 1700 makes breathing easy and comfortable. The CoolSAFE filter material ideally combines low breathing resistance and high filter performance in one mask. And the CoolMAX valve efficiently releases humid and warm exhaled air to the outside. This makes breathing particularly easy and keeps you cool under the mask.
-
)
Dräger X-plore® 1900 is a high-performance, single-use dust mask for protection against fine dust and particles. The premium particle filtering mask is available in two sizes, combining ease of use, exceptional comfort and optimal fit. For the highest degree of safety – even for people wearing spectacles.
-
)
For the safe emergency evacuation of bed-ridden patients.
Our Safety Sheet Evacuation Sheet fixes semi permanently to the bottom of a flexible foam mattress by means of strong elastics. It has safety belts to hold the patient on the mattress and pulling straps at each end. The combination of the slippery sheet and mattress which will pass through narrow doorways and down stairs.
-
)
For smoothly evacuating mobility impaired patients over a variety of surfaces.
The wall mounted Safety Mat Evacuation Sled from allows the smooth transfer of disable patients over any surface even concrete or stairs. The sled can be stored in the wall mounted bag provided and easily deployed when needed in an emergency. Supplied complete with wall mounted rapid deployment pouch.
-
)
A light, portable, strong, high quality stairway carry chair.
The Safety Chair EV-2000 evacuation chair provides a quick and easy emergency evacuation with a 159kg (350lbs) weight capacity and folds away neatly for compact storage.
-
)
It is vital for individuals and organisations to have robust evacuation procedures to conform to legislations such as Regulatory Reform (Fire Safety) Order 2005 and the Health & Safety at Work Act.
Assisting the mobility impaired should be supported by dedicated training. We offer both operator training and train the trainer courses for all chairs to ensure you have the required skill set when needed if an emergency evacuation is triggered.
-
)
Protect your Evac+Chair or other building assets using our anti-theft device, which is fitted with a key-controlled alarm.
The alarm is self contained in red polycarbonate housing with a compact design. It can easily be installed in minutes with corresponding symbols that can be used globally. It has both a visual and an audible alarm when activated which is powered by a 9v battery.
-
)
The purpose of the transfer board is to bridge the gap between two seats, for example, a wheel chair to evacuation chair and vice-versa. A transfer can then be carried out whilst negating the need to lift the passenger.
-
)
The Evac+Chair Comfy Seat will provide patients with an equal level of comfort comparative to a wheel chair seating arrangement. It is ergonomically designed and manufactured from memory foam which aids in a horizontal transfer. It can easily fit onto the frames of the 300H, 500, 600H & 110 Evac+Chairs.
-
)
-
)
-
)
The Sprinter 85 powered stair climber provides a convenient, robust, cost efficient solution to high volume logistics delivery. The lightweight design, simple push-button control, easy stowage and removable fast-charging battery make the Sprinter 85 a market-leading powered stair climber.
-
)
Stanley’s Sprinter Lifter is an automatic hand stacker that enables the safe, quick, and efficient loading and unloading of materials. A cost-effective alternative solution to a permanent vehicle tailgate, the electric hand stacker has a 170kg lifting capacity with a lift height of up to 1.1m.
-
)
The Sprinter Pro 425 is the most powerful powered stair climber in the Sprinter range. With a carrying capacity of up to 425kg, the Sprinter Pro 425 stair climber trolley enables weighty and awkward loads to be manoeuvred by a single operator - using a remote control.
-
)
Our Guard-Check gives you a quick and easy method to accurately check the guard opening size, based on the distance from the hazard zone for hands as referenced by BS EN ISO 13857.
-
)
Our Opto-Check gives you a quick and easy method to accurately check the operation of an opto-electronic sensing device, based on the methods as referenced by BS EN ISO 61496-2 and HSG180. It can be used during the design, installation, and inspection of barrier guards to make sure they operate correctly.
-
)
WHAT SPECIFICATIONS OF WORKWEAR ARE REQUIRED FOR WOMEN?
-
)
ACT Distribute and Co-Author a wide variety of health and safety related publications including books from iAS, RMS Publishing and individual authors.
-
)
iAS Awareness E-Learning is ideal for induction training.
-
)
ACT offer a wide range of Construction Industry Training Board courses.
-
)
ECITB's CCNSG training scheme is widely recongised throughout the UK construction sector.
-
)
A brand new course focusing on holistic risk management for professionals of any field. This course has been created by NEBOSh and the IIRSM.
-
)
All of our training courses are available as in-house training courses delivered at your location.
-
)
A one day health and safety training course suitable for director and executive level.
-
)
IOSH Working Safely is an 8 hour e-learning course suitable for any staff to improve their understanding of health and safety.
-
)
This Diploma level qualification is ideal for safety professionals looking to develop new skills or show competence in health and safety practice.
-
)
An accredited National Vocational Qualification (NVQ) in health and safety. This level 3 course is ideal for professionals looking to develop a career in health and safety while at work.
-
)
Level 3 Health and Safety Certificate for construction professionals. Available as a classroom, live virtual course and e-learning.
-
)
This comfortable, padded handling belt is used to help carers transfer a patient from one position to another.
-
)
Transfer Handles are designed to eliminate the need for staff to overreach during lateral transfers and reduce the risk of injury.
-
)
The Lo-Raiser Handling Sling is an innovative device to help manually raise a patient who has some lower body strength.
-
)
The Banana Board is the original seated transfer board, used by a broad range of patients for the past 25 years.
-
)
The Banana Q2 Seated Transfer Board has a patented design and exceptionally high weight capacity of 285kg, making it ideal for use by bariatric patients as well as children and adults.
Product Showcase
The Safety & Security Event Series
.png)
.png)
.png)
.png)
